Chronicles of a DIY Bathroom Remodel
Our bathroom remodel is finally finished. Here are the before and after pictures:
Category Archive: Remodeling
Bathroom Remodel 7: Finished
I really let this project drag on. We’ve had a functional bathroom for weeks, but I haven’t really had a chance to finish the drywall and paint. We entertained guests a couple of weekends ago, which made me put off sanding the drywall mud. After they left, the wife broke the central vaccuum. She somehow sucked up a three foot long rubber band that she uses to work out. After disassembling it a few times, I eventually got it out. Last weekend, I finally got around to painting the beadboard and trim.
Bathroom Remodel 6: Almost Finished
After finally installing a proper toilet, I set about hanging the beadboard on the walls. I had been dreading this step because of all the intricate cuts that were involved. It would’ve been easy if it was just a matter of measuring and drawing lines; but as I’ve said before, nothing is plumb in my house. Beadboard is like graph paper; it’s easy to see angles on it. I was worried that even if I cut everything perfectly, it would still look bad as I lifted corners to make the seams fit snugly. I decided to start by lining up the two light switches. I’m a nut for symmetry. I took it as a good omen that the first piece of paneling only need to be trimmed once to fit.
Bathroom Remodel 5: Tile
Last week, I put on my general contractor hat and oversaw the tile and plumbing jobs. This is what the floor looks like:
Bathroom Remodel 4: Progress
On Monday afternoon, the wife put a couple of coats of stain blocking primer on the ceiling and walls. I realize I still have some bumps to smooth out on the ceiling patch, but it looks okay.
Bathroom Remodel 3: The Hard Work
We finally got into the thick of the bathroom remodel over the weekend. And by “we” I really mean “I.” The wife helped demo the baseboards and wainscoting, but there’s just not enough room in our tiny bathroom for two people to work. She primed and painted the bead board outside while I worked in the bathroom. In what I hope wasn’t an omen, I had to call a plumber early Saturday morning. One of the faucet shut-offs was so brittle and corroded that it had to be replaced. After that, I disassembled the sink and got the vanity out of the room.
Bathroom Remodel 2: It Begins
Although I just posted the Bathroom Remodel Plan, I actually started working on the room a couple of weeks ago when the wife was out of town. I figured that since I was going to fill the house with dust from the Hardwood Floor Patch Job, I might as well start skim-coating the bathroom walls with mud. To begin, I had to take everything out and scrape down the walls and ceiling.
Bathroom Remodel 1: The Plan
We’ve never been too pleased with the bathroom in our tiny house. The previous owners remodeled it immediately before selling. As a matter of fact, we first viewed the house when the room was under construction. In retrospect, I should have asked them to give us an allowance in lieu of finishing the room. They did some good structural work beneath the floor, but everything else was done on the cheap. Here’s what the room looked like when we bought the house. We tried to dress it up a bit with fixtures, but it was like putting lipstick on a pig.
Patching A Hardwood Floor, Part 3
The hardwood patch is pretty much complete. In retrospect, I don’t know what was worse — the sweat sessions that characterized the wood preparation and replacement stages or the non-stop cleaning sprees the wife and I have undertaken throughout the past week.
Patching A Hardwood Floor, Part 2
Preparing the new wood was labor intensive, but at least there was no chance I would change things for the worse in my house. Once I moved to the ‘removal and replacement’ step, that became a very real possibility. With any DIY project, you run the risk of screwing everything up even worse and paying someone else to fix the original problem and your additional mistakes. Knowing that, I was determined to get this one right. Before I could start working with my new wood slats, I had to remove every piece of wood that made up the old vent hole.
